|
Home | Site Map | Cisco How To | Net How To | Wireless | Search | Forums | Services | Donations | Careers | About Us | Contact Us| |
[
Home |
Contents |
How To Discussion |
Archive |
Search |
Post
|
Reply
| Next
| Previous
|]
From: Date: 03 Nov 2006 Time: 13:53:39 -0500 Comments: I have seen quite a few posts regarding the same problem as I am getting, however non of the solutions submitted seem to resolve it in my case, so any assistance would be greatly appreciated. I have a Windows SBS 2003 sat on my network with an internal address with port 1723 NAT'ed to our external static ip address on the router. Likewise GRE is forwarding on the router. I have run through the remote access wizard in order to enable VPN access however whenever clients try to connect, the connection "seems" to start working (Verifing Username/ Password, Registering your computer on the network) then stops with "TCP/ IP CP reported error 733. The connection to the remote computer could not be completed. You may need to adjust the protocols on this computer..." I have re-run through setting up Routing and Remote Access, and have assigned a pool of addresses for VPN connections outside of the servers DHCP range (but on the same subnet) but this does not seem to have fixed the problem. In my event log I get Remote Access Error 20050, the user connected to the porthas been disconnected because no network protocols were sucessfully negotiated. I have re-run through the routing and remote access and have even tried disabling our network firewall, but still cant seem to establish a PPTP tunnel. Any suggestions would be greatly appreciated
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2009
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.