Home | Site Map | Cisco How To Net How To | Wireless | Search | Forums | Services | Setup Guide | Chicagotech MVP | About Us | Contact Us|

Bob Lin Photography services

Real Estate Photography services 
Linksys Routers

Can't forward port on Linksys RV016 router
Can't make the connection of Linksys router to router VPN
Linksys gateway VPN can't browser by name
Error IKE[1] **Check your PFS setting ! from Linksys
Router Common Issues on Linksys routers

This tunnel should not be initiator

For step by step setup Linksys router to router VPN, visit this page: http://www.howtonetworking.com/VPN/browsingovervpn0.htm

Can't make the connection of Linksys router to router VPN

Symptom: When creating a Linksys router to router VPN, the router shows disconnected but the log doesn't list any errors.

Cause:  incorrect Local Secure Group or Remote Secure Group. For consultants, refer to JO081204.

Error IKE[1] **Check your PFS setting ! from Linksys

Causes: Authentication, IKE, and pre-shared keys donít match. For consultants, refer to case 113004WA

Router Common Issues on Linksys Routers

Symptom: You have setup two Linksys routers as a gateway to gateway VPN. The both routers display the VPN "Connect". However, you can't ping the remote computer by name or ip, and the log doesn't list any errors.
2. PPTP doesn't pass through.

Causes: 1. Incorrected Secure Group settings.
2. Incorrected
Remote Security gateway (in most cases, Any doesn't work)
3. Incorrected Dynamic Routing Mode.
3. Software no function.

For consultants, refer to case 112204CK

This tunnel should not be initiator

Symptom: when creating a Linksys router to router VPN, you may receive error "This tunnel should not be initiator" in the log.

Cause: incorrect Local Secure Group or Remote Secure Group. For consultants, refer to JO081204

 

 

Bob Lin Photography services

Real Estate Photography services 

  This web is provided "AS IS" with no warranties.
Copyright © 2002-2017 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.