From:
billage01 <billage01.2xje45@no-mx.forums.net>
To:
none
Subject:
Re: File and Printer sharing turned off on reboot
Date:
09/26/2007
16:27:34
I am having the same problem
Did you get a answr on this one?
Cheers
Will
--
billage01
Top
From:
cambralenta <cambralenta@discussions.microsoft.com>
To:
none
Subject:
Re: File Sharing Will Not Enable
Date:
09/26/2007
14:39:09
I have the same problem and the same result with net share command! Do you
have your problem resolved? Someone know what can be the problem?!
Thanks.
"Jeremy Thomas" wrote:
> Bump
>
> "Jeremy Thomas" wrote:
>
> > Thanks for all the help so far. I have checked for viruses using the
latest
> > versions and virus definitions from AVG, Norton, and Windows One care
> > service. I have used Spybot search and destroy, Adaware, AVG Spyware
ans
> > Zonealarm's Spyware to check my system. All say it is clean with no
> > infections. Is there anything else I can try other than re-installing.
> >
> > Thanks Agian.
> >
> > Jeremy Thomas
> >
> > "Robert L [MVP - Networking]" wrote:
> >
> > > In this case, I would check the any spyware or virus.
> > >
> > > Bob Lin, MS-MVP, MCSE & CNE
> > > Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
> > > How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
> > > "Jeremy Thomas" <JeremyThomas@discussions.microsoft.com> wrote
in message news:514A22D0-B8AA-47BE-BDC5-6E8287601A4C@microsoft.com...
> > > Thanks agian for the quick response. My exact output
when i try to do a net
> > > share is as follows.
> > >
> > >
> > > c:\>net share
> > > The service name is invalid.
> > >
> > > More help is available by typing NET HELPMSG 2185.
> > >
> > >
> > > Here is a list of my current running services
> > >
> > >
> > > Image Name
PID Services
> > >
> > > ========================= ========
> > > ============================================
> > > System Idle Process
0 N/A
> > >
> > > System
4 N/A
> > >
> > > smss.exe
588 N/A
> > >
> > > csrss.exe
656 N/A
> > >
> > > wininit.exe
700 N/A
> > >
> > > csrss.exe
712 N/A
> > >
> > > services.exe
744 N/A
> > >
> > > lsass.exe
760 KeyIso, ProtectedStorage, SamSs
> > >
> > > lsm.exe
768 N/A
> > >
> > > winlogon.exe
880 N/A
> > >
> > > svchost.exe
964 DcomLaunch, PlugPlay
> > >
> > > svchost.exe
1024 RpcSs
> > >
> > > svchost.exe
1072 WinDefend
> > >
> > > svchost.exe
1172 Audiosrv, Dhcp, Eventlog, lmhosts, wscsvc
> > >
> > > svchost.exe
1260 AudioEndpointBuilder, CscService,
> > > EMDMgmt,
> > >
hidserv, Netman, PcaSvc, SysMain,
> > >
> > >
TabletInputService, UxSms, WdiSystemHost,
> > >
> > >
Wlansvc
> > >
> > > svchost.exe
1276 AeLookupSvc, Appinfo, BITS, EapHost,
> > > gpsvc,
> > >
IKEEXT, iphlpsvc, MMCSS, ProfSvc, RasMan,
> > >
> > >
seclogon, SENS, ShellHWDetection, Themes,
> > >
> > >
Winmgmt, wuauserv
> > >
> > > audiodg.exe
1340 N/A
> > >
> > > SLsvc.exe
1376 slsvc
> > >
> > > svchost.exe
1420 EventSystem, FDResPub, netprofm, nsi,
> > >
> > >
SSDPSRV, upnphost, W32Time, WebClient
> > >
> > > svchost.exe
1552 CryptSvc, Dnscache, KtmRm, NlaSvc,
> > > TapiSrv,
> > >
TermService
> > >
> > > vsmon.exe
1572 vsmon
> > >
> > > dwm.exe
1948 N/A
> > >
> > > explorer.exe
1980 N/A
> > >
> > > spoolsv.exe
624 Spooler
> > >
> > > svchost.exe
644 BFE, DPS, MpsSvc
> > >
> > > AddFiltr.exe
1408 AddFiltr
> > >
> > > avgamsvr.exe
1664 Avg7Alrt
> > >
> > > avgupsvc.exe
944 Avg7UpdSvc
> > >
> > > avgrssvc.exe
1924 AvgCoreSvc
> > >
> > > DevSvc.exe
800 Capture Device Service
> > >
> > > avgrssvc.exe
1144 N/A
> > >
> > > CLCapSvc.exe
952 CLCapSvc
> > >
> > > iPodService.exe
2180 iPod Service
> > >
> > > iviRegMgr.exe
2236 IviRegMgr
> > >
> > > LSSrvc.exe
2252 LightScribeService
> > >
> > > mdm.exe
2276 MDM
> > >
> > > msvsmon.exe
2312 msvsmon80
> > >
> > > msvsmon.exe
2344 N/A
> > >
> > > svchost.exe
2404 PolicyAgent
> > >
> > > StarWindService.exe
2428 StarWindService
> > >
> > > usnsvc.exe
2472 usnjsvc
> > >
> > > XAudio.exe
2552 XAudioService
> > >
> > > hpqwmiex.exe
2564 hpqwmiex
> > >
> > > WmiPrvSE.exe
2748 N/A
> > >
> > > CLSched.exe
2804 CLSched
> > >
> > > MSASCui.exe
3024 N/A
> > >
> > > igfxpers.exe
3032 N/A
> > >
> > > SynTPEnh.exe
3192 N/A
> > >
> > > QLBCTRL.exe
3228 N/A
> > >
> > > QPService.exe
3260 N/A
> > >
> > > avgcc.exe
3268 N/A
> > >
> > > zlclient.exe
3280 N/A
> > >
> > > sidebar.exe
3292 N/A
> > >
> > > wmpnscfg.exe
3344 N/A
> > >
> > > SyncBack.exe
3412 N/A
> > >
> > > ypops.exe
3420 N/A
> > >
> > > WmiPrvSE.exe
3504 N/A
> > >
> > > wmpnetwk.exe
3656 WMPNetworkSvc
> > >
> > > unsecapp.exe
3748 N/A
> > >
> > > sidebar.exe
3952 N/A
> > >
> > > OUTLOOK.EXE
464 N/A
> > >
> > > firefox.exe
4264 N/A
> > >
> > > cmd.exe
2024 N/A
> > >
> > > tasklist.exe
2828 N/A
> > >
> > >
> > >
> > > "Robert L [MVP - Networking]" wrote:
> > >
> > > > When doing net share command, you should have similar
result:
> > > >
> > > > C:\Documents and Settings\blin>net share
> > > >
> > > > Share name Resource
Remark
> > > >
> > > >
-------------------------------------------------------------------------------
> > > > IPC$
Remote IPC
> > > > print$
C:\WINDOWS\system32\spool\drivers
> > > >
Printer Drivers
> > > > C$
C:\
Default share
> > > > ADMIN$ C:\WINDOWS
Remote Admin
> > > > Temp C:\Temp
> > > > HP5m
IP_192.168.10.99 Spooled HP LaserJet
5MP
> > > > The command completed successfully.
> > > >
> > > >
> > > >
> > > > Bob Lin, MS-MVP, MCSE & CNE
> > > > Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
> > > > How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
> > > > "Jeremy Thomas"
<JeremyThomas@discussions.microsoft.com> wrote in message
news:DE99632E-4BBF-4A87-B2E5-E26BBACC2EE9@microsoft.com...
> > > > Thank you for the
quick response. I checked and File and Printer
> > > > sharing for Microsoft Networks is enabled in the
properties of my network
> > > > adapter. I am not familiar with the net
share command, but when i type "net
> > > > share" in the cmd window i get the
following response. "The service name
> > > > is invalid" "More help by typing NET HELPMSG
2185" When i type that in, I get
> > > > the same error displayed "The service name is
invalid" Thanks again to
> > > > anyone who can help me with this problem.
> > > >
> > > > Jeremy
> > > >
> > > > "Robert L [MVP - Networking]" wrote:
> > > >
> > > > > Have you enabled File and Printer sharing for
Microsoft Networks? Also what's the result if using net share command?
> > > > >
> > > > > Bob Lin, MS-MVP, MCSE & CNE
> > > > > Networking, Internet, Routing, VPN
Troubleshooting on http://www.ChicagoTech.net
> > > > > How to Setup Windows, Network, VPN & Remote
Access on http://www.HowToNetworking.com
> > > > > "Jeremy Thomas"
<JeremyThomas@discussions.microsoft.com> wrote in message
news:B11E6AEB-B678-4867-9FB8-9FF0AEBD34FA@microsoft.com...
> > > > > Hello. I have been
trying to figure this problem out and have had no luck.
> > > > > I have searched but have found no
reference to anyone having my problem. I
> > > > > am running Windows Vista Business
32bit. When I go to the network and sharing
> > > > > center and click on file sharing,
I choose "Turn on file sharing" and then
> > > > > hit apply. The problem is
that file sharing stays turned off. There is no
> > > > > error display at all. I am
at a loss of what can be causing this.. Network
> > > > > discovery is turned on. If i
try to turn on public folder sharing I get a
> > > > > error that says "The RPC
server is unavalible". I can turn on "Password
> > > > > protected sharing" and "Media
Sharing" with no problem. With those turned on
> > > > > I still cannot turn on file
sharing. Thank you all in advance for any help
> > > > > you can provide.
> > > > >
> > > > > Jeremy Thomas
> > > > >Th
Top
From:
Robert L \(MS-MVP\) <noreply@chicagotech.net>
To:
none
Subject:
Re: File Sharing Will Not Enable
Date:
09/26/2007
18:40:53
This link may help,
Vista:
can't enable file sharing ...My exact output when i try to do a net
share is as follows. c:\>net share The service name is invalid. More help is
available by typing NET HELPMSG 2185. ...
www.chicagotech.net/netforums/viewtopic.php?t=333&view=next&sid=dd91b40766fe047628f531ec9155ea43
--
Bob
Lin,
MS-MVP,
MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"cambralenta" <cambralenta@discussions.microsoft.com> wrote in message
news:2C4A1722-70B5-4419-92DA-422CD50F4FDC@microsoft.com...
>I have the same problem and the same result with net share command! Do you
> have your problem resolved? Someone know what can be the problem?!
> Thanks.
>
>
> "Jeremy Thomas" wrote:
>
>> Bump
>>
>> "Jeremy Thomas" wrote:
>>
>> > Thanks for all the help so far. I have checked for viruses using the
>> > latest
>> > versions and virus definitions from AVG, Norton, and Windows One care
>> > service. I have used Spybot search and destroy, Adaware, AVG Spyware
>> > ans
>> > Zonealarm's Spyware to check my system. All say it is clean with no
>> > infections. Is there anything else I can try other than
re-installing.
>> >
>> > Thanks Agian.
>> >
>> > Jeremy Thomas
>> >
>> > "Robert L [MVP - Networking]" wrote:
>> >
>> > > In this case, I would check the any spyware or virus.
>> > >
>> > > Bob Lin, MS-MVP, MCSE & CNE
>> > > Networking, Internet, Routing, VPN Troubleshooting on
>> > > http://www.ChicagoTech.net
>> > > How to Setup Windows, Network, VPN & Remote Access on
>> > > http://www.HowToNetworking.com
>> > > "Jeremy Thomas" <JeremyThomas@discussions.microsoft.com>
wrote in
>> > > message news:514A22D0-B8AA-47BE-BDC5-6E8287601A4C@microsoft.com...
>> > > Thanks agian for the quick response. My exact output
when i try to
>> > > do a net
>> > > share is as follows.
>> > >
>> > >
>> > > c:\>net share
>> > > The service name is invalid.
>> > >
>> > > More help is available by typing NET HELPMSG 2185.
>> > >
>> > >
>> > > Here is a list of my current running services
>> > >
>> > >
>> > > Image Name
PID Services
>> > >
>> > > ========================= ========
>> > > ============================================
>> > > System Idle Process
0 N/A
>> > >
>> > > System
4 N/A
>> > >
>> > > smss.exe
588 N/A
>> > >
>> > > csrss.exe
656 N/A
>> > >
>> > > wininit.exe
700 N/A
>> > >
>> > > csrss.exe
712 N/A
>> > >
>> > > services.exe
744 N/A
>> > >
>> > > lsass.exe
760 KeyIso, ProtectedStorage, SamSs
>> > >
>> > > lsm.exe
768 N/A
>> > >
>> > > winlogon.exe
880 N/A
>> > >
>> > > svchost.exe
964 DcomLaunch, PlugPlay
>> > >
>> > > svchost.exe
1024 RpcSs
>> > >
>> > > svchost.exe
1072 WinDefend
>> > >
>> > > svchost.exe
1172 Audiosrv, Dhcp, Eventlog,
>> > > lmhosts, wscsvc
>> > >
>> > > svchost.exe
1260 AudioEndpointBuilder,
>> > > CscService,
>> > > EMDMgmt,
>> > >
hidserv, Netman, PcaSvc,
>> > > SysMain,
>> > >
>> > >
TabletInputService, UxSms,
>> > > WdiSystemHost,
>> > >
>> > >
Wlansvc
>> > >
>> > > svchost.exe
1276 AeLookupSvc, Appinfo, BITS,
>> > > EapHost,
>> > > gpsvc,
>> > >
IKEEXT, iphlpsvc, MMCSS,
>> > > ProfSvc, RasMan,
>> > >
>> > >
seclogon, SENS,
>> > > ShellHWDetection, Themes,
>> > >
>> > >
Winmgmt, wuauserv
>> > >
>> > > audiodg.exe
1340 N/A
>> > >
>> > > SLsvc.exe
1376 slsvc
>> > >
>> > > svchost.exe
1420 EventSystem, FDResPub, netprofm,
>> > > nsi,
>> > >
>> > >
SSDPSRV, upnphost, W32Time,
>> > > WebClient
>> > >
>> > > svchost.exe
1552 CryptSvc, Dnscache, KtmRm,
>> > > NlaSvc,
>> > > TapiSrv,
>> > >
TermService
>> > >
>> > > vsmon.exe
1572 vsmon
>> > >
>> > > dwm.exe
1948 N/A
>> > >
>> > > explorer.exe
1980 N/A
>> > >
>> > > spoolsv.exe
624 Spooler
>> > >
>> > > svchost.exe
644 BFE, DPS, MpsSvc
>> > >
>> > > AddFiltr.exe
1408 AddFiltr
>> > >
>> > > avgamsvr.exe
1664 Avg7Alrt
>> > >
>> > > avgupsvc.exe
944 Avg7UpdSvc
>> > >
>> > > avgrssvc.exe
1924 AvgCoreSvc
>> > >
>> > > DevSvc.exe
800 Capture Device Service
>> > >
>> > > avgrssvc.exe
1144 N/A
>> > >
>> > > CLCapSvc.exe
952 CLCapSvc
>> > >
>> > > iPodService.exe
2180 iPod Service
>> > >
>> > > iviRegMgr.exe
2236 IviRegMgr
>> > >
>> > > LSSrvc.exe
2252 LightScribeService
>> > >
>> > > mdm.exe
2276 MDM
>> > >
>> > > msvsmon.exe
2312 msvsmon80
>> > >
>> > > msvsmon.exe
2344 N/A
>> > >
>> > > svchost.exe
2404 PolicyAgent
>> > >
>> > > StarWindService.exe
2428 StarWindService
>> > >
>> > > usnsvc.exe
2472 usnjsvc
>> > >
>> > > XAudio.exe
2552 XAudioService
>> > >
>> > > hpqwmiex.exe
2564 hpqwmiex
>> > >
>> > > WmiPrvSE.exe
2748 N/A
>> > >
>> > > CLSched.exe
2804 CLSched
>> > >
>> > > MSASCui.exe
3024 N/A
>> > >
>> > > igfxpers.exe
3032 N/A
>> > >
>> > > SynTPEnh.exe
3192 N/A
>> > >
>> > > QLBCTRL.exe
3228 N/A
>> > >
>> > > QPService.exe
3260 N/A
>> > >
>> > > avgcc.exe
3268 N/A
>> > >
>> > > zlclient.exe
3280 N/A
>> > >
>> > > sidebar.exe
3292 N/A
>> > >
>> > > wmpnscfg.exe
3344 N/A
>> > >
>> > > SyncBack.exe
3412 N/A
>> > >
>> > > ypops.exe
3420 N/A
>> > >
>> > > WmiPrvSE.exe
3504 N/A
>> > >
>> > > wmpnetwk.exe
3656 WMPNetworkSvc
>> > >
>> > > unsecapp.exe
3748 N/A
>> > >
>> > > sidebar.exe
3952 N/A
>> > >
>> > > OUTLOOK.EXE
464 N/A
>> > >
>> > > firefox.exe
4264 N/A
>> > >
>> > > cmd.exe
2024 N/A
>> > >
>> > > tasklist.exe
2828 N/A
>> > >
>> > >
>> > >
>> > > "Robert L [MVP - Networking]" wrote:
>> > >
>> > > > When doing net share command, you should have similar
result:
>> > > >
>> > > > C:\Documents and Settings\blin>net share
>> > > >
>> > > > Share name Resource
Remark
>> > > >
>> > > >
-------------------------------------------------------------------------------
>> > > > IPC$
Remote IPC
>> > > > print$
C:\WINDOWS\system32\spool\drivers
>> > > >
Printer Drivers
>> > > > C$
C:\
Default share
>> > > > ADMIN$ C:\WINDOWS
Remote Admin
>> > > > Temp
C:\Temp
>> > > > HP5m
IP_192.168.10.99 Spooled HP LaserJet
5MP
>> > > > The command completed successfully.
>> > > >
>> > > >
>> > > >
>> > > > Bob Lin, MS-MVP, MCSE & CNE
>> > > > Networking, Internet, Routing, VPN Troubleshooting on
>> > > http://www.ChicagoTech.net
>> > > > How to Setup Windows, Network, VPN & Remote Access on
>> > > http://www.HowToNetworking.com
>> > > > "Jeremy Thomas"
<JeremyThomas@discussions.microsoft.com> wrote
>> > > in message news:DE99632E-4BBF-4A87-B2E5-E26BBACC2EE9@microsoft.com...
>> > > > Thank you for the
quick response. I checked and File and
>> > > Printer
>> > > > sharing for Microsoft Networks is enabled in
the properties of
>> > > my network
>> > > > adapter. I am not familiar with the net
share command, but
>> > > when i type "net
>> > > > share" in the cmd window i get the
following response. "The
>> > > service name
>> > > > is invalid" "More help by typing NET HELPMSG
2185" When i type
>> > > that in, I get
>> > > > the same error displayed "The service name is
invalid" Thanks
>> > > again to
>> > > > anyone who can help me with this problem.
>> > > >
>> > > > Jeremy
>> > > >
>> > > > "Robert L [MVP - Networking]" wrote:
>> > > >
>> > > > > Have you enabled File and Printer sharing for
Microsoft
>> > > Networks? Also what's the result if using net share command?
>> > > > >
>> > > > > Bob Lin, MS-MVP, MCSE & CNE
>> > > > > Networking, Internet, Routing, VPN
Troubleshooting on
>> > > http://www.ChicagoTech.net
>> > > > > How to Setup Windows, Network, VPN & Remote
Access on
>> > > http://www.HowToNetworking.com
>> > > > > "Jeremy Thomas"
<JeremyThomas@discussions.microsoft.com>
>> > > wrote in message
>> > > news:B11E6AEB-B678-4867-9FB8-9FF0AEBD34FA@microsoft.com...
>> > > > > Hello. I have been
trying to figure this problem out and
>> > > have had no luck.
>> > > > > I have searched but have found no
reference to anyone
>> > > having my problem. I
>> > > > > am running Windows Vista Business
32bit. When I go to the
>> > > network and sharing
>> > > > > center and click on file sharing,
I choose "Turn on file
>> > > sharing" and then
>> > > > > hit apply. The problem is
that file sharing stays turned
>> > > off. There is no
>> > > > > error display at all. I am
at a loss of what can be
>> > > causing this.. Network
>> > > > > discovery is turned on. If
i try to turn on public folder
>> > > sharing I get a
>> > > > > error that says "The RPC
server is unavalible". I can
>> > > turn on "Password
>> > > > > protected sharing" and "Media
Sharing" with no problem.
>> > > With those turned on
>> > > > > I still cannot turn on file
sharing. Thank you all in
>> > > advance for any help
>> > > > > you can provide.
>> > > > >
>> > > > > Jeremy Thomas
>> > > > >Th
Top
From:
Jeremy Thomas <JeremyThomas@discussions.microsoft.com>
To:
none
Subject:
Re: File Sharing Will Not Enable
Date:
09/27/2007
06:49:02
Nothing I did would fix this problem. I looked for answers for many months
and tried MANY things. I ended up doing a clean install. Sorry.
Jeremy
Top
From:
brian <brian@discussions.microsoft.com>
To:
none
Subject:
RE: Help! Vista Internet problems
Date:
09/23/2007
16:34:02
i have vista home on a new computter (e machense4231) and am not getting any
problems .problems seem to happen when you upgrade(programs conflict)mostley
upgrad from xp.
--
brianb
"samfowler11" wrote:
>
> Hi, I have recently upgraded a Pc to Windows Vista Ultimate x64. I have
> had no problems with anything except the internet.
>
> Once I installed
Vista
I had access to my home network and the internet
> briefly. I then lost the connection to the internet but was able to
> connect to my home network (and access router pages etc.). I was able to
> connect to the internet again for slightly longer but the connection
> disappeared not long afterwards again. The problem cited by the
Vista
> network and sharing centre is that the IP settings are incorrect but
> when the auto repair tries to fix it nothing happens.
>
> I am connected to a Netgear DG834G via an ethernet cable and that is
> connected directly to the internet.
>
> I have been wrestling with this for about 2 weeks now and nothing I
> have found on google or anywhere else has helped! any help would be
> brilliant, I'm at my wits end!
>
> Sam
>
>
> --
> samfowler11
>
Top
From:
guydel <guydel@discussions.microsoft.com>
To:
none
Subject:
Re: HP All-in-one printers disappearing when there are changes in
Date:
09/25/2007
10:26:06
Are you a professionnal computer analyst or an amateur ? this is exactly the
same problem I have with my Printer C5180, and that a lot persons have with
different brand of printers. You steared me toward a spooler crash which is
not the problem. The most plausible cause is network problem described in
this thread. Some people suggested disabling HP CUE DeviceDiscovery will this
work or not. I want a strait answer, no bull !
"Alan Morris [MSFT]" wrote:
> Is the printer located in the registry?
>
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
>
> Are the printers local devices targeting the network card on the printer or
> are these connections to a machine sharing the printers.
>
> When you install the inbox driver for this device, does it also get removed?
>
> When you say HP detects that they are there, do you mean the printers?
Do
> you know what application is detecting the printers? If HP has software
> that detects printers who knows what they might do if the printer is no
> longer detected.
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Kathi Johnston" <KathiJohnston@discussions.microsoft.com> wrote in message
> news:28771DA9-70CD-4951-B5D9-9FF8EAD051E6@microsoft.com...
> >
> > I have an HP Officejet 7410 AIO (wireless network printer). I am
having
> > the
> > same problem. I have 4 networked machines. 3 XPs, 1 Vista Home
Premium
> > (Dell 1705 laptop-Vista was factory installed). The
Vista
machine keeps
> > losing the printer. It's no where to be found. But you can't
reinstall
> > the
> > drivers (which I've conveniently left on my desktop as I've needed them so
> > often), as HP detects that they are there (somewhere). You have to
> > uninstall
> > the drivers to get to reinstall the drivers, just to get the printer back.
> > It's time consuming and annoying. You don't look for the drivers
UNLESS
> > you
> > are trying to print.
> >
> > Any help would be great.
> >
> > Thanks,
> > Kathi
>
>
>
Top
From:
guydel <guydel@discussions.microsoft.com>
To:
none
Subject:
RE: HP All-in-one printers disappearing when there are changes in the
Date:
09/25/2007
11:36:02
According to this very long thread, disabling de HP CUE DeviceDiscovery seems
to be a temporary solution (REDCATTOO has kept is printers for almost a
month).
The guys from MSFT Alan Morris and Ken Zhao seem to be as useless as HP
Support ! They keep asking questions instead of providing solutions. At least
we have a forum so share our experiences. Thanks to everybody, will keep you
informed if it works for me.
"mlai" wrote:
> Hi,
> Just wondering if anybody has seen this problem.
HP claims that they
> have not seen this problem (despite I have reported it before...)
>
> I have a Photosmart C6180 installed on my network. Under XP, everything
> seems to work fine. However, on my
Vista
x64 machines, the printer and fax
> seems to disappear when there are changes in the network status (for
> example, resuming from suspend, and disabling and r-enabling the network
> interfaces, even when the interfaces being changed does not connect to the
> printer). I would get a
Vista
error saying that the HP Network Printer
> Services has stopped responding and then after this happens, I have a very
> good chance that the C6180 printer and fax will disappear from my list of
> printers on the machine.
>
> When this happens, the only way is to run the HP software (which I
> downloaded from the web for
Vista
x64) and add a new printer from there.
>
> Has anyone seen this before? Is there a fix?
>
> Many thanks.
>
> PS. Called local HP and their tech support gave me the stupid response of
> "We don't know. Maybe don't suspend your computer?". I have a
laptop
> running the software, idiot......
>
>
>
Top
From:
Bill W <Bill W@discussions.microsoft.com>
To:
none
Subject:
RE: I've fixed the internet connection problem(This is not it)
Date:
09/30/2007
13:13:01
Hi
I tried this I still have the same problem. wireless connection drops after
an hour of inactivity and says local area connection only. It requires
reboot of the machine to restore the connection. I have also tried the other
recommend fixes of turning of the network power saving options.
"ab5000" wrote:
>
> --
> Andy
>
> I had this problem that was causing my router and cable modem to lose it's
> internet connection on a repeated basis. I made this change as suggested
and
> it seems to have paid off.
>
> One curious thing - this is the new Belkin N router, so
Vista
and it's
> networking seems to be an issue for hardware manufacturers.
>
> But I'm really glad some folks found the fix!!!! Microsoft I usually
like
> the products but this kind of crazy.
>
> "Steveb" wrote:
>
> > If you've been experiencing internet dropping, hanging, ect. on
Vista,
you're
> > not alone. I was ready to throw the thing in the trash. I finally fixed it
by
> > going to the Network and Sharing center, click the View Status on the
> > connection, click Properties and then uncheck the QoS Packet Scheduler, the
> > Internet Protocol Version 6, and both Link Layer Topology choices. Then
click
> > OK, restart and enjoy your surfing! Hope this helps. Let me know.
Top
From:
ckevin00@gmail.com
To:
none
Subject:
Re: Keeping a network share
Date:
09/25/2007
08:23:08
You can also do this without batch files or plaintext passwords.
Create an account on the remote machine with the same username/
password Vista Home Premium logs on with, and
Vista
will automatically
map the shares at startup. I can confirm that this works for
Vista
Home Premium trying to access shares on a Win2k machine.
On Sep 11,
10:43 pm,
"GTS" <x...@y.net> wrote:
> Unfortunately, that's normal with Home versions. One solution
(with XP
> Home) has been to run a batch file from startup. Although the same idea
> applies forVista, UAC blocks the batch from running from the startup
> folder. It can be run from a shortcut on the desktop after startup.
>
> net use X: \\server\sharename /USER: usernamme password
> (drive letter optional)
> __
>
> "Kevin" <Ke...@discussions.microsoft.com> wrote in message
>
> news:2DE33C11-2B00-4D6D-8583-B316C0EEA6C9@microsoft.com...
>
>
>
> >I have a users using WindowsVistaHome Premium. Everytime they reboot,
> >their
> > network share logs out, and they have to log back in to the share. I would
> > like it if it stuck after every reboot. Anyone have any sggestions on how
> > to
> > keep it logged in?
>
> > Kevin- Hide quoted text -
>
> - Show quoted text -
Top
From:
Antknee <Antknee@discussions.microsoft.com>
To:
none
Subject:
Re: LAN Connection
Date:
09/28/2007
13:24:00
If you're using a router, make sure you have the newest firmware installed.
You'll find it at your router's website.
I updated mine and it works like a charm on the
Vista
machine and of course
the already working XP units.
AH
"Robert L [MVP - Networking]" wrote:
> Try to re-configure the NIC. this post may help,
>
> Solved: Limited connectivity with ...Solved: Limited connectivity with
Vista
notebook ... Limited connectivity message, and won't connect to the network or
the internet. ...
>
http://www.chicagotech.net/netforums/viewtopic.php?t=246
>
>
>
Bob Lin,
MS-MVP,
MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
> "Bpark" <Bpark@discussions.microsoft.com> wrote in message
news:1A979B08-F4A7-4C4E-9B8D-CA63B3C8E930@microsoft.com...
> We have purchased multiple Compaq laptops and use them to setup a
control
> panel to access through the web. Have set them up as similar as
the XP OS
> which has worked fine but
Vista
gives us a limited connectivity message and
> will not bring up the web page associated with our control panels.
We set up
> TCP/IPv4 to manually select an IP address with subnet but still no
luck. Any
> thoughts on this would be appreciated
Top
From:
STUART <STUART@discussions.microsoft.com>
To:
none
Subject:
Re: Limewire
Date:
09/24/2007
11:26:01
I HAD LIME WIRE WHEN I FIRST GOT MY LAPTOP BUT AFTER ABOUT 4 DAYS I LOST MY
SHARED FILE I HAVE TRIED TO DELEAT THE PROGRAM BUT WHEN I TRY TO LOAD A NEW
ONE UP IT SAYS I HAVE 3 IN THE SYSTEM PLEASE HELP
--
CRACKING UP STU
"Mona_Lisa" wrote:
> Guys, I got it. Go to free.grisoft.com and download AVG (a free antivirus
> software), then uninstall whatever virus software you have on your PC
> (McAfee, Norton, etc...). I called my local "unbiased" computer repair man
> and this is the advice he gave me. I just finished doing it and Limewire
> works great. Good Luck!
>
> "warpedfox" wrote:
>
> > best i got is do a system repair to the day before you started haveing
> > problems with the program did you also deleted out of the c drive or
just
> > went to remove programs
> >
> > "Mona_Lisa" wrote:
> >
> > > Fox,
> > > It didn't work. Anybody got any other ideas?
> > >
> > > "warpedfox" wrote:
> > >
> > > > Yeah I fixed it unloaded both reloaded java and loaded java runtime
envirment
> > > > then reloaded limewire not had a problem since. hope it helps
> > > >
> > > > "Mona_Lisa" wrote:
> > > >
> > > > > I am having the same problem. I have the latest version of Java and
LimeWire
> > > > > installed still to no avail. Any more suggestions?
> > > > >
> > > > > "Yavuz Selim TATAR" wrote:
> > > > >
> > > > > > Hi.
> > > > > > Limewire working with sun java latest version. You can update your
java
> > > > > > application and fix your problem.
> > > > > >
> > > > > > Yavuz Selim TATAR
> > > > > > NetWork Computer /
Turkey
> > > > > >
> > > > > >
> > > > > > "warpedfox" <warpedfox@discussions.microsoft.com>, iletisinde sunu
yazdi,
> > > > > > news:F67374D0-6FC6-4057-944E-C00E3A6966AA@microsoft.com...
> > > > > > >I just got a new computer with vista on it. I had limewire working
fine for
> > > > > > > about a day then it just stop working it wont even load up. Anyone
have
> > > > > > > any
> > > > > > > idea how to fix this?
> > > > > >
> > > > > >
Top
From:
Dwarf <Dwarf@discussions.microsoft.com>
To:
none
Subject:
RE: Loosing Internet Connectivity
Date:
09/23/2007
15:10:00
Hi Dustin,
Did you install
Vista
using upgrade media or did you use the full version?
If you used the upgrade version then please refer to my post 'Clean Install
Windows Vista Using Upgrade Media' in the newsgroup 'Windows Vista
Installation and Setup' for detailed instructions on how to use upgrade media
to clean install.
Dwarf
"Dustin Brown" wrote:
> Vista Home Premium keeps dropping my internet connection. It happens every
> day and it happens two or three times a day. Before I bought
Vista
I was
> running XP SP2 on this machine and I never had problems with it. I have two
> other computers on my network. One runs XP and the other is a Mac. Neither of
> them have internet connectivity issues - only my
Vista
machine, and only
> since I started running
Vista
on it.
>
> I use the sleep button on my keyboard when I'm finished using my computer.
> When I wake it back up, the internet usually works for about ten minutes,
> then I loose the connection. All applications loose their connection to the
> net - browsers, gmail notifier, uTorrent...everything.
>
> I have tried the Diagnose and Repair feature, but I get a message that says
> "Cannot communicate with www.microsoft.com(207.46.192.254). Network
> diagnostics pinged the remote host but did not receive a response." Then it
> gives me the option to "Reset the network adapter "Wireless Network
> Connection". I click that, it goes through a "Repairing" process, then it
> says "Windows tried to repair but the problem still exists."
>
> I have also tried going to the command line and doing "ipconfig /renew", but
> that didn't help either.
>
> It's strange, because if I hover my house over the network icon in my
> taskbar, the tray that slides up says "Access: Local and Internet". And when
> I go to Network and
Sharing
Center,
at the top it shows graphics of my
> computer connecting to my network, connecting to the internet. There are no
> red X's anywhere. As far as
Vista
networking is concerned, I'm still
> connected to the net.
>
> Please, please, please. I need suggestions on things I can try to solve
> this. The only thing I've found that temporarily resolves it is rebooting my
> computer, which is especially annoying since
Vista
takes so long get up and
> running again when you restart.
>
> Thanks,
> Dustin
Top
