Home | Site Map | Cisco How ToNet How To | Wireless |Search | Forums | Services | Donations | Careers | About Us | Contact Us|

Fixed unidentified network using static IP

Network Sharing , TCP/IP, Internet, Wireless, Exchange, IIS, ISA and Print

Fixed unidentified network using static IP

Postby chicagotech » Sat Sep 29, 2007 10:14 am

Strangely, i was able to solve the problem. hope it doesnt re occur.

i reset the ipaddress to get automatically in IPv4 of my wireless, but it didnt instead again gave a static ip to the adapter without a gateway address. but this solved the problem. of multiple network. but i was still not able to browse the internet so i manually inserted the ip address of my netgear wireless as the gateway to my wireless network adapter and i was able to surf the net and there is only one (the right setting) network displayed in the taskbar area.

The problem is considered to be solved until it reouccurs (YN)

So the solution is reset the IP Address in the IPv4 of ur wireless and set the Gateway to the IP Address of the Wireless rrouter also set the same IPaddress (IP Address of the router) as the DNS address of your Wireless network adapter. This should solve the problem.

I have a Netgear wireless g network that connects to my computer as multiple
networks. one - as the ssid i set my network up as, and another as an
unidentified network. If i disconnect from one they both go away. The
multiple network issue causes IE not to connect.
Refreshing the IE Page Gives the required Page.
few days bacck everything was ok on my system
No changes to configuration is done. this problem started coming since my nephew who got his laptop and accesssed the internet through the same netgear simultaneously on his system along with me.
I have tried removing the "Not Preset" under advanced options of my Network adapter to the mac address it actually has.
also tried disabling the McAfee Completely.
The Netgear firmware should not be a problem as this is the issue which came up jest 2 days back and i ve been using netgear on my laptop with vista since 4 months now.
it should also not be a problem with the IPv4 Address or IPv6 being enabled etc as in the threads above.
i have not tried resetting the Netgear yet (Hardware reset)
Wondering why microsoft is not having any solution on this forum yet. is this the issue with Vista ?

Please HELP?
Kiran Jain
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
chicagotech
Site Admin
 
Posts: 6356
Joined: Mon Nov 27, 2006 1:24 pm
Location: Chicago USA

Postby chicagotech » Thu Jan 24, 2008 12:43 am

Thank you for sharing your experience with us.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com


"lodogg" <lodogg> wrote in message news:lodogg.33o23g@DoNotSpam.com...
>
> I found the resolution and it was very simple. After numerous tries and
> nothing working with a variety of tips, I decided to try something and
> it worked. I am also using calbe internet via ethernet cable. This was
> where my problem lied. The wireless part worked fine through my Netgear
> router. Resetting IP and default gateways did nothing so I decided to
> uninstall the driver for my ethernet adapter, rebooted and installed
> the driver again. It the was able to identify my router and connected
> right away.
>
>
> --
> lodogg
> ------------------------------------------------------------------------
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
chicagotech
Site Admin
 
Posts: 6356
Joined: Mon Nov 27, 2006 1:24 pm
Location: Chicago USA

Re: Fixed unidentified network using static IP

Postby guest » Mon Jun 01, 2009 11:15 pm

Thank you for sharing your experience with us.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com

>I read through and tried everything in this post thread to fix the same issue
> on a friend's laptop. Unfortunately none of these suggestions worked. What
> finally worked for me was to remove Norton 360 using the Norton Removal Tool
> (http://www.softpedia.com/progDownload/N ... 26173.html).
> Once that product was removed from the laptop, all networking issues were
> resolved. If you're still having an issue with this error in Vista, look at
> your Internet Security Software first and if removing that doesn't work then
> try the suggestions in this post.
Tablet and Smartphone Setup Guide
http://www.quicksetupguide.com

Troubleshooting Vista Wireless
http://chicagotech.net/
guest
 
Posts: 9027
Joined: Mon Nov 27, 2006 1:10 pm

Re: Fixed unidentified network using static IP

Postby Oseanna » Sat Jul 11, 2009 10:58 am

Just needed to say I tried everything when I had 'Unidentified Network' and only a local connection and what worked in the end - Nortons Removal Tool - as soon as it had finished my connection came back online, it may not help evryone but if you have had nortons on try the removal tool.
Hope it helps .
Oseanna
 
Posts: 1
Joined: Sat Jul 11, 2009 10:49 am


Return to Networking

Your Ad Here

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 8 guests