Home | Site Map | Cisco How ToNet How To | Wireless |Search | Forums | Services | Donations | Careers | About Us | Contact Us|

How to configure persistent logons to the target

Active Directory, Domain, DNS, WINS, DHCP, SBS, New Releases.

How to configure persistent logons to the target

Postby chicagotech » Mon Apr 13, 2015 2:23 pm

Quoted from Microsoft:

Note If you see the target on the Persistent Target tab, the following steps are not required.

Method 1: Use the iSCSI Initiator in Control Panela.In Control Panel, double-click iSCSI Initiator.
b.Click the Targets tab.
c.Click a target in the Select a target list, and then click Log On.
d.Click to select the Automatically restore this connection when the system boots check box, and then click OK.

Method 2: Use the Command Prompt windowa.Click Start, click Run, type cmd, and then click OK.
b.At the command prompt, type the following command, and then press ENTER:
iscsicli persistentlogintarget target_iqn T * * * * * * * * * * * * * * * 0
Note target_iqn is the IQN name of the target.
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Site Admin
Posts: 7178
Joined: Mon Nov 27, 2006 1:24 pm
Location: Chicago USA

Return to Windows

Your Ad Here

Who is online

Users browsing this forum: Google [Bot] and 3 guests