Home | Site Map | Cisco How ToNet How To | Wireless |Search | Forums | Services | Donations | Careers | About Us | Contact Us|

Configure BindPersistentVolumes for iSCSI Initiator

Active Directory, Domain, DNS, WINS, DHCP, SBS, New Releases.

Configure BindPersistentVolumes for iSCSI Initiator

Postby chicagotech » Mon Apr 13, 2015 2:24 pm

Quoted from Microsoft:

Method 1: Use the iSCSI Initiator in Control Panela.In Control Panel, double-click iSCSI Initiator.
b.Click the Bound Volumes/Devices tab.
c.Click Bind All to bind all the persistent targets. Or, click Add, and then enter a drive letter or mount point to bind a specific target.
d.Click OK.
Method 2: Use the Command Prompt windowa.Click Start, click Run, type cmd, and then press ENTER.
b.Type iscsicli BindPersistentVolumes, and then press ENTER.

Note This is the same as selecting the Bind All option in Method 1.

Note Use this resolution only if you experience this specific issue with version 2.x of the iSCSI Initiator service.
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
chicagotech
Site Admin
 
Posts: 6704
Joined: Mon Nov 27, 2006 1:24 pm
Location: Chicago USA

Return to Windows

Your Ad Here

Who is online

Users browsing this forum: No registered users and 7 guests