Home | Site Map | Cisco How ToNet How To | Wireless |Search | Forums | Services | Donations | Careers | About Us | Contact Us|

How to: disable ICS public connection in Vista

Active Directory, Domain, DNS, WINS, DHCP, SBS, New Releases.

How to: disable ICS public connection in Vista

Postby chicagotech » Thu Feb 08, 2007 11:40 am

Disabling ICS public connection from ICS client is supported in Vista also.
In Vista network window, right click menu on "Residential Gateway" has the
option to enable/disable ICS public connection. For this option to show up in
right click menu, Network sharing need to be enabled and machine should have
got 192.168.0.X address.

Does right clicking on Residential Gateway icon couple of times helped in
getting the required option?
Also please check if connecting laptop directly (without router, using wired
connection) to XP machine, makes the option appear in right click menu.

The above information might help in understanding why disable option is not
coming for you.



"Chris S." wrote:

> I have a question regarding ICS between XP and Vista. I have a desktop
> system running XP SP2 that is using a dialup connection to the internet
> (unfortunately broadband isnt an option for our area yet). That system is
> setup for ICS on the dialup. I have a laptop that is dual booting between XP
> and Vista currently that is connecting to the XP box via a linksys router
> that is basically configured to be a dumb hub to connect the wireless to the
> wired network. When using XP on the laptop I am able to control the dialup
> and disconnect of the ICS on the main XP system by clicking on the internet
> gateway that shows up in network connections. it also displays a network
> icon on the task bar by the clock when it is dialed up and I can click it to
> disconnect when I'm done. Since setting up Vista I seem to not be able to
> take control of the modem on the XP box with ICS. I see a resident gateway
> pop up in the Vista network window and can right click on it for properties
> and it says that its the ICS connection on the XP box but no control of it.
> The XP box will dial out when vista makes a request by launching IE or
> another internet app just fine but I have no control to make it hang up when
> I'm done unless I boot back into XP and tell it to disconnect there. I
> disabled UPnP on the linksys router since it was displaying 2 of the resident
> gateways with it enabled thinking it was getting confused but have not had
> any luck gaining control of the modem from Vista.
>
> I have the XP box wired into the router and the laptop connects to the
> router via wireless and obtains the IP from the XP box running ICS (DHCP on
> the router is disabled on the LAN side). This setup runs flawless when its
> XP to XP but the solution to getting vista to let me control the modem
> connect disconnect eludes me. I do have the options set to let others
> control the connection on the XP box and nothing has changed on that side so
> its definitely vista not cooperating very well
>
> Anyone have any suggestions on how to get control of the ICS connecton
> inside of Vista so that I dont have to dual boot just to disconect the line?
>
> Sorry for the lengthy post :)
> Chris
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
chicagotech
Site Admin
 
Posts: 6992
Joined: Mon Nov 27, 2006 1:24 pm
Location: Chicago USA

Return to Windows

Your Ad Here

Who is online

Users browsing this forum: No registered users and 5 guests