Home | Site Map | Cisco How ToNet How To | Wireless |Search | Forums | Services | Donations | Careers | About Us | Contact Us|

Unrecognized command: srr-queue bandwidth share 10 10 60 20

Cisco Router, Firewall, VPN, SDM, ASA and Switch

Unrecognized command: srr-queue bandwidth share 10 10 60 20

Postby chicagotech » Wed Dec 06, 2017 11:11 am

I follow the instruction to configure QoS on one of our Cisco switch 4503 uisng these commands:

conf t
int g1/0/2
srr-queue bandwidth share 10 10 60 20
priority-queue out
mls qos trust dscp
auto qos voip trust
end.

I get Unrecognized command when running srr-queue bandwidth share 10 10 60 20. Can you ask your Cisco engineer why?
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
chicagotech
Site Admin
 
Posts: 7096
Joined: Mon Nov 27, 2006 1:24 pm
Location: Chicago USA

Re: Unrecognized command: srr-queue bandwidth share 10 10 60 20

Postby chicagotech » Wed Dec 06, 2017 11:13 am

Run auto qos trust only, that will take all default settings applying to the port.

2960I#sh run int gi1/0/39
Building configuration...

Current configuration : 181 bytes
!
interface GigabitEthernet1/0/39
switchport mode access
srr-queue bandwidth share 1 30 35 5
priority-queue out
mls qos trust cos
auto qos trust
spanning-tree portfast
end
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
chicagotech
Site Admin
 
Posts: 7096
Joined: Mon Nov 27, 2006 1:24 pm
Location: Chicago USA


Return to Cisco

Your Ad Here

Who is online

Users browsing this forum: No registered users and 2 guests