Home | Site Map | Cisco How ToNet How To | Wireless |Search | Forums | Services | Donations | Careers | About Us | Contact Us|

VPN/RAS not working, error 733 on Win2k3

RRAS, VPN, TS/RDP, Routing and remote Access.

VPN/RAS not working, error 733 on Win2k3

Postby chicagotech » Sun Aug 19, 2007 11:10 pm

Thank you for the update.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com

Well i got it working by assigning a Static Pool. Although i dont know why i had to. I guess my router is just crap :) At home i get an ip from my linksys router just fine. Now i just have to figure out DNS. Since the router is not a DNS server i guess i need to turn it on at the server. Thanks for all the help!

daniel.

Ok, if i setup a static pool for VPN and set my client to static, is there anything i need to do in the router/dhcp server? Other than maybe an exclusion to those ranges. Do i still use the router as the gateway?
"Robert L [MVP - Networking]" <noreply> wrote in message

Yes, use static pool. This how to may help,

How to setup a static pool of IP addresses for VPN client How to setup a static pool of IP addresses for VPN clients. Error 733: the PPP control protocol for this network protocol is not available on the server. ...
http://www.howtonetworking.com/VPN/staticpool.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Daniel M" <dtm28> wrote in message news:13ccknl796big5b@corp.supernews.com...
I have read these pages but they do not help me. I know what 733 is, and i suspect i am having an IP address issue. As stated earlier, the DHCP server is the netgear router on the work server and a linksys server on the home server. I am trying to run DHCP but i have also tried putting in a static ip into the host connection. I'm really baffled by this one. on my home server, i just enabled it and it all worked fine. Is there anything i have to do to set a static ip other than set my client connection to static with the gateway as the router?


"Robert L [MVP - Networking]" <noreply> wrote in message news:OLdBwIO4HHA.5852@TK2MSFTNGP02.phx.gbl...
VPN error 733 is protocol issue. This search result may help,

vpn error 733 Situation: one of our clients setup a XP Pro as a VPN host but they keep receiving "TCP/IP CP reported error 733 - the PPP control protocol for this network ...
www.chicagotech.net/casestudy/vpnerror733.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Daniel M" <dtm28> wrote in message news:13ca5umifiuds9c@corp.supernews.com...
I have 2 win 2k3 servers, one at my house and one at work. For my how
machine, i just enabled RRAS and i can connect just fine. I run behind a
linksys router that is the DHCP server with no DNS server.

For my work server i enabled RRAS and i cannot seem to connect, even
locally! I keep getting 733 errors. I am running a netgear router with the
same setup as above. I tried to connect locally from the same lan to
eliminate the router but i get the same error. This works at home.

Does anyone have any suggestions? I have gone through the settings window by
window and nothing is different. No extra software is installed on the
server and the fw is disabled. I have gone through the logs but i really
dont know what i am looking at. I shouldnt have to configure anything for
the basic VPN to work. I need some suggestions. Any hotfixes or anything
else i am missing? Both are running the latest service packs and update.
thanks.

daniel.
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
chicagotech
Site Admin
 
Posts: 6670
Joined: Mon Nov 27, 2006 1:24 pm
Location: Chicago USA

Return to VPN, TS and Remote Access

Your Ad Here

Who is online

Users browsing this forum: Google [Bot] and 2 guests