Home | Site Map | Cisco How To | Net How To | Wireless | Case Studies | Forums | Services | Donations | Careers | About Us | Contact Us|
|
|
Home | Site Map | Cisco How To | Net How To | Wireless | Case Studies | Forums | Services | Donations | Careers | About Us | Contact Us| |
|
VPN client ping VPN server only but others
Q: We setup VPN on Windows 2003. XP VPN client access the domain
resource without any issues. However, Vista can ping the VPN server only
but not other servers. Sometimes, when he ping a server by IP (no VPN
server), it replies at first line and others are time out (see below). I
have tried two Vista computers and both have the same problem. Any
suggestions?
C:\Users\blin>ping 10.0.0.221
Pinging 10.0.0.221 with 32 bytes of data:
Reply from 10.0.0.221: bytes=32 time=64ms
TTL=127
Request timed out. Request timed out. Request timed out.
Ping statistics for 10.0.0.221:
Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), Approximate round trip times in milli-seconds: Minimum = 64ms, Maximum = 64ms, Average = 64ms
A: 1. Make sure the IP routing is enabled in the VPN server.
Routing how to
2. Try to disable the IPv6.
Vista IPCONFIG and Network Settings
3. Disable Auto-tuning on Windows Vista by following this how to.
Vista IPCONFIG and Network Settings
Troubleshooting Vista with clean boot
5. If all above don't fix it, try to remove IPv6 completely.
Vista IPCONFIG and Network Settings
Post your questions, comments, feedbacks and suggestions Related Topics
|
|
|
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2008
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.
