Cannot access whole network

Q: This seem to be the most common problem with a VPN setup, but none of the
solutions I've found have worked for me.

I have configured a VPN in my DC/DHCP/DNS server. This is behind an iptables
linux based firewall/NAT. I can connect to the server from the Internet, and
I can see all the server resources (shares, terminal server, etc.)

However I cannot reach any LAN host, either by IP or name.

The server has only "Remote access server" enabled (Router is disabled) and
it has no filter defined in any adapter. It is configured to provide
addresses from a pool (10.0.1.1 - 10.0.1.253, net mask 255.255.255.0). My LAN
is 10.0.0.0/24.

Any help, VERY welcomed, as I've being fighting this for over a week now.

A: To access whole network resources, you need to enable Router also. Otherwise, you are limited to access the server only.

vpn process and errors

The Analysis of VPN Process and The Meaning of The Errors. Establishing a VPN connection includes the following four processes, and you may receive some ...
www.chicagotech.net/VPN%20process.htm

VPN Issues

Troubleshooting VPN VPN Browsing Issues · VPN Error Code · VPN Logon Issues · VPN Name Resolution · VPN as Router · VPN Routing Issues · VPN TCP/IP Settings ...
www.chicagotech.net/vpnindex.htm

VPN error code

Receiving VPN error 619 while connecting to a VPN via SBC ... VPN Error 741 - The local computer does not support the required encryption type ...
www.chicagotech.net/vpnerrors.htm

RRAS/VPN Q&A Collections

Access remote computer using hostname over VPN without WINS and lmhosts · Accessing the Internet is low while connecting to a VPN ...
www.chicagotech.net/Q&A/vpnq&a.htm

VPN client can ping server only

Situation: one of our clients setup a VPN on windows server. The VPN client can ping the VPN server without problem. However, they can’t access other ...
www.howtonetworking.com/casestudy/vpn1.htm

Computer browser over VPN

Computer browsing over VPN involves routers, multiple segments and ... Alternatively, it is possible to browse over VPN by using LMHOSTS files on all VPN ...
www.howtonetworking.com/VPN/browsingovervpn0.htm

How to vpn automatically

You may have many options to connect a VPN server automatically when logon a ... Create a logon batch with rasdail command to start the VPN connection. ...
www.howtonetworking.com/VPN/autorasdial1.htm

how to create a windows vpn client

How to Create a Windows VPN Client 1/9. 1. To open the Network Connections folder, click Start, click Control Panel, click Network and Internet Connections, ...
www.howtonetworking.com/RemoteAccess/setupvpnclient1.htm