Home | Site Map | Cisco How To Net How To | Wireless | Search | Forums | Services | Setup Guide | Chicagotech MVP | About Us | Contact Us|

Bob Lin Photography services

Real Estate Photography services 

 

Cannot join the domain because of Norton Security.

Q1: In a test environment I want a wxp pro client to join to a w2k3 domain
(those computers a directly connected) but it doesnít work.
By turning off the Firewall in Norton Internet Security using the wxp sp2
firewall it works fine.
I have tried to get some information in the log file of the xp firewall, but
I donít understand which ports I have to open on the Norton firewall or rules
I have to create to join the domain.

Thank you 4 your answers

A: You may need to add the subnet to the Norton Security.

Q2: That worked. Thank you.

Related Topics

The client could not connect to the remote computer

After checking the Norton Security settings, we find the firewall allows only local IP ... It works after adding 192.168.1.0 subnet to the Norton Security. ...
www.chicagotech.net/remoteissues/rdc2.htm

VPN error 800

5) Make sure other secure software blocks your access, for example, if you use Norton secure software, you may need to add the remote client's IP so that ...
www.howtonetworking.com/vpnissues/error800.htm

How to share printers and files

Firewall software such as Norton Internet security or ZoneAlarm need to be told not to block the connection. Don't be tempted to just turn these off as you ...
www.howtonetworking.com/Networking/sharing11.htm

troubleshooting is not accessible error

If yes, Setp 4 - check name resolution If you receive "Request Time Out", check if any firewall such as Windows Firewall, Alert Zone, Norton Internet ...
www.howtonetworking.com/Troubleshooting/notaccessibalea1.htm
 

Bob Lin Photography services

Real Estate Photography services 

 

  This web is provided "AS IS" with no warranties.
Copyright © 2002-2017 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.