Home | Site Map | Cisco How To Net How To | Wireless | Search | Forums | Services | Setup Guide | Careers | About Us | Contact Us|

 

Event ID 4199 - "The system has detected a conflict for IP address"

Symptom: 1. You just turn on you computer, and receive an error message similar to one of the following messages:

The system has detected a conflict for IP address <xxx.xxx.xxx.xxx> with the system having hardware address <yy-yy-yy-yy-yy-yy>.

The system detected an address conflict for IP address <xxx.xxx.xxx.xxx> with the system having hardware address <yy-yy-yy-yy-yy-yy>. The local interface is being disabled.

2. In the Event Viewer, you may see the Event ID 4199 - Description:

The system detected an address conflict for IP address 192.168.1.100 with the system having network hardware address 00:0C:41:9B:88:89.

Cause: There is another networking computer or device on the network using the same IP address.

Resolutions:

  1. You may want to renew the computer IP by using ipconfig /release and renew command.
  2. You may assign a static IP.
  3. To find out the other device that is using the same IP, you may have three options. 1) Check the records of DNS or WINS. 2) Disconnect your computer from the network, and then using ping a command to find another computer host name. 3) You can use ARP a command to find the Mac address of other device.
  4. Or check this case study - System detected an address conflict for IP

Related Topics

Case Study - The system has detected a conflict for IP address

Calculate Hosts
Crossover Cable
IPv4 Subnet Chart
Mac Address
Patch Cable
Ports

netstat command
network troubleshooting
other DOS commands

  This web is provided "AS IS" with no warranties.
Copyright 2002-2013 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.