|
 Troubleshooting
Mac wireless can't get IP from DHCP: The
client tries to setup their Enterprise Wireless on one of new Mac
laptop, but it can't get IP address from the DHCP server. It always
shows 169.254.x.x IP.
Wireless: Acquiring IP address: the client setup Amedp wireless AP.
All laptops can see it, but can't access the the internet. The wireless
status shows "Acquiring ip address", but it never gets real IP address.
Wireless Intermittent connectivity issues: the client has two
Cisco 1200 AP. Some may get wireless but other don't. Those users have
the wireless may work for a while and disappear.
Wireless Enterprise Certificate Issue:
The wireless laptop still sees the old Thawte
certificate. All wireless laptops including new laptops have the same
issue
Wireless issues
| If your wireless
network doesn't have an AP, you will need to set your
cards to use "AdHoc" mode. When setup Ad Hoc mode, make
sure all wireless clients use ... |
Windows Mobile Issues
Connectivity issue between WM6.0 and Exchange 2003 SP2; How to
configure Exchange for mobile services
Troubleshooting Vista Wireless
| Q & A: network key
I
used is invalid in Vista wireless ... Solved:
Vista wireless doesn't match required settings ... |
Wireless connection issues
| Symptom 1: It take a long time
to connect to the wireless. Symptom 2: The wireless
connection drop every a few minutes. ... |
Vista Wireless troubleshooting Articles
Wireless troubleshooting
|
How to
BlackBerry How to
BlackBerry Issues
How to configure your wireless
connection in Windows XP
How to add
a wireless router to a domain network
How to configure WLAN in order to
logon to a domain
How to enable
wireless tracing for troubleshooting
How
to limit wireless connect to only one connection
How to
re-create corrupted wireless profile in XP
How to
re-create corrupted wireless profile in Vista
How to setup Exchange email in Motorola Droid
How to
setup WPA Enterprise wireless on windows
How to setup wireless in Windows Vista
How to setup Wireless router
as a switch
Limit wireless adapter to a single
network
Setup Wireless in Windows 7
What do I need to setup a wired/wireless network
Which Wireless equipment I should choose
Mobile Phone
How to
iPad Wireless Configuration
How to setup Enterprise wireless on iPad
How to setup Wireless on iPad
iPad Wi-Fi
Issues
WAP Enterprise doesn’t work with Event ID: 6273:
After we upgraded our IAS in Windows 2003 to NPS in Windows 2008 R2, we
have some wireless issues. For example, the user setup can use WAP
Enterprise on the Cisco AP IP 10.0.30.66, but not blin. However, setup
get access denied when access AP IP 10.0.30.60 while some user can use
the wireless in IP 10.0.30.60.
How to deploy WPA/WEP key with group policy? - I'm
using Server 2008 std. The point of this is to allow the clients to
automatically connect.
How to configure a Radius Server Polices in NPS Windows 2008:
Access point HP MSM422 works as a radius client (test environment) then
i will use the Controller MSM765 to set up the radius profile
How
to run Smart Setup Wizard on Amped Wireless Access Point:
After you connect power and cable to the Amped Wireless Access Point or
Repeater, run http://setup.ampedwireless.com
or http://192.168.1.240 to run
Smart Setup Wizard.
How to setup Wireless Enterprise on Dell WLAN
Card Utility: Open Dell WLAN Card Utility. Highlight the Wireless and click Edit.
|
